These doors are 28mm scale, so 1"wide x 1 5/8" high. I used basswood board 1/16" thick as a base, then framed it by laying 1/8"wide basswood strips around the edges. The grooves in the door were carved with a "v-tool" wood gouge.
The hardware was made from thin styrene, and the dents in them carved using a different gouge. For the shape of the hinges, I made a template in Photoshop Elements, which I then spray-glued onto the styrene. Hinges attached to door with superglue.
No comments:
Post a Comment